Introducing the Power Module75: A Better Way to Cool Large Engines
- All engines produce heat
- All engine radiators reduce engine power
- Only the ElectraTherm PM75 cools the engine while generating UP TO 75KW of emission-free electricity
- The PM75 is actually a radiator with a payback because it cools the engine while making valuable on-site power
- The PM75 provides additional power for gensets and additional throughput for gas compressors without additional fuel
- The PM75 reduces engine derate in warm weather
Typical Applications
Any commerical radiator that rejects heat greater than 190ºF including:
- Manufacturing
- Oil and gas
- Landfills
- Wastewater treatment
- Hospitals
RADIATOR WITH A PAYBACK
All radiators need to be replaced. By upgrading to the ElectraTherm Power Module75 you benefit from a radiator that pays for itself by generating electricity from heat while providing 100% cooling.
By improving efficiency and reducing energy costs, the PM75 provides an ROI of 1-3 years, which is significantly improved if you’re already looking to replace your radiator. Go ahead and make the switch. Abandon your power-hungry radiator with a power-producing cooler.
Example Application
1.6 MW Cat 3520C Genset
Operating hours: 8500
Net power: 595 MWh per year
Cooling load: 170 MWh per year
- Average Annual Temperature: 65°F
- 8,500 operating hours per year
- Hot Water Inlet: 230°F @ 220 gpm
- Radiator Demand: 10 kW
- Radiator Parasitic Cooling Load: 85 MWh per year
- Parasitic Cooling Cost: -$8,500 per year (at $0.10/kWh)
- PM75 Production: 570 MWh per year
- Newly Available Electricity: 655 MWh per year (85MW+570MW)
- Total Savings: $65,500 per year (650,000 kWh X $.10)
- Efficiency Increase: 4.8%
Learn more about the Power Module75 by downloading the brochure here:
